Red Seal Measurement Datamate 2200 Скачать руководство пользователя страница 117

Страница: 117 / 128

Intro

Read This

First

Transmitter

Installation

Power Supply

Wiring

I/O

Wiring

Batch

Wiring

Startup

Trouble-

shooting

Program-

ming

Main

Config

System

Model

Numbers

Xmitter

Specs

Return

of Goods

Calibration

Diagnostic

Datamate 2200 O&M

Page 111

9A.1 HART HHC Online Menu

The main menu is the normal operational mode of the Datamate 2200 transmitter.

Unlike viewing the menus from the Datamate 2200 display, the available program

features are arranged slightly different when using the Hand Held Configurator.

Instead of all programming functions being centered around the Main Menu, they

are instead accessible from the

“Online”

menu. From the HART

Online

menus,

all process measurements, outputs, alarms and error log can be viewed. The error

log may also be cleared from the Main Menu. Access to the Program mode is also

available through the use of a password.

Menu or Display

Description

Default Display

The default display will appear on the HHC display when it is powered

1. Offline

and connected to a HART device. The HHC will connect to a device if

2. Online

one is present (connected). If several devices are connected, the HHC

3. Frequency Device

will poll as directed in the

Utility/Configure Communication/Polling

4. Utility

Menu

Online Menu

1. View Process Vars

allows the user to review the present value of

the process variables and/or the analog and pulse outputs.

1. View Process Vars

2. View Status

allows the user to review a list of parameters and

2. View Status

diagnostics that are out of limits. The list is organized as last-in first-

3. Program

out. This will make the last event the first seen by the user. Events

will be removed from the list when they return to normal after they

have been acknowledge.

3. Program

gives the user the ability to view and program the

Datamate 2200. Entering the proper password allows access to

configuration and programming data.

1. View Process Vars

1. View Measurements

allows the user to view the present value of

the process variables five at a time. All variables may be viewed by

using the up/down arrow keys. The value of the variable highlighted

may be viewed by selecting the right arrow key.

2. View Outputs

allows the user to view the present analog or pulse

output value.

2. View Outputs

1. Analog 1 / 2. Analog 2 / 4. Analog 4

displays the process variable

name, present value, output current value and % of range for the

1. Analog 1

output.

2. Analog 2

3. Pulse Output

3. Pulse Output

displays the process variable name, present value,

4. Analog 4

output frequency and % of range for the output when a rate,

density or temperature is assigned to the output. When a totalizer is

assigned to the output, the process variable name, present value,

pulses per unit of measure and number of pulses sent out will be

displayed.

Содержание Datamate 2200

































































































































Результаты поиска

Содержание Datamate 2200

Отзывы:

Бренды по названию

Популярные бренды

Red Seal Measurement Datamate 2200, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание Datamate 2200

Отзывы:

Бренды по названию

Популярные бренды