Assembly
Completing the forestay (R20 – R40)
14
5.1.1.2 Shortening the top spacer
Shorten the 1740-mm-long spacer hose by the offcut measurement 'C' using a sharp knife.
The shortened spacer hose will become the top spacer during assembly.
Pos: 21 /ZINDEL/Rollreffanlagen/Montage/Alu/R10 - R40/Topkappe vorbereiten (R10 - R40) @ 1\mod_1399557777207_13349.docx @ 13905 @ 3 @ 1
5.1.2 Preparing the top bushing
After assembly the top bushing will cover the top furling section.
The following can be used as a top furling section:
•
a standard furling section that has been shortened to a length less than 3000 mm but greater
than 1500 mm,
•
if furling section shortening is not necessary, a standard furling section of length 3000 mm.
1.
Insert the two halves of the top bushing into the top furling section in such a way that the join
line formed by their mating surfaces is lined up with the groove in the furling section.
2.
Drill through the furling section and the top bushing half on each side of the furling section using
a drilling bit.
Содержание RF90
Страница 4: ...Notes www reckmann com ...
Страница 74: ...Notes 70 ...