RECKMANN RF90 Скачать руководство пользователя

Страница: 42 / 74

Assembly

Connecting the drive unit to the forestay

5.5.5 Connecting the foil to the drive unit

Notice

Risk of corrosion of the foil

Corrosion will lead to destruction of the foil.

−

Apply Tef-Gel or another galvanic corrosion inhibitor to the surfaces of the foil and the
furler drive adapter in contact with each other.

1. Insert the split bottom bushing into the feeder section.

2. Apply Tef-Gel to the bottom 10 cm of the feeder section and to the inside surface of the furler

drive adapter on the drive unit.

3. Place the threaded plate in the recess in the feeder section.

Slide the drive unit over the forestay and the feeder section.

Secure the feeder section in the furler drive adapter with two cap screws. (R6, R7: screw on
using three screws.)

Pos: 48 /ZINDEL/Rollreffanlagen/Montage/rod/Rodvorstag fixieren @ 1\mod_1401092898727_13349.docx @ 13970 @ 3 @ 1

5.5.6 Securing the rod forestay

1. Insert the forestay through the drive unit until the rod collet can be mounted on the forestay.

2. Grease the rod collet halves.

3. Mount the rod collet halves on the forestay and screw the rod collet all the way into the drive

unit.

Pull the forestay back into the drive unit until the rod head is situated in the rod collet.

Pos: 49 /ZINDEL/Rollreffanlagen/Montage/wire/Drahtseilvorstag fixieren @ 1\mod_1401094042287_13349.docx @ 13971 @ 3 @ 1

Содержание RF90











































































Результаты поиска

Содержание RF90

Отзывы:

Похожие инструкции для RF90

Бренды по названию

Популярные бренды

RECKMANN RF90, Инструкция по эксплуатации

Результаты поиска

Содержание RF90

Отзывы:

Похожие инструкции для RF90

Бренды по названию

Популярные бренды