REAC RCB10+, Руководство пользователя

Страница: 6 / 31

4
2.4 Connectors
Actuator connectors
A REAC actuator 2 equipped with a 6.5 mm phono connector can be connected.
Charger jack
The charger jack is used for connection of the battery charger.
Hand control (HC) connector
The RHC10 hand control can be used together with the RCB10+. It is as standard equipped with a 6.5
mm phono connector.
To achieve full IP protection, all cable connectors must be equipped with O-rings.
The actuator and hand control connectors are of the same type. To facilitate identification,
color coding of cables and connectors is available as an option.
2.5 Battery
RCB10+ has a built-in battery, with a capacity of 2.0 Ah.
The duration of a fully charged battery depends on the current consumption in each application and the
usage pattern.
RCB10+ can handle energy from regenerating actuators. This makes it possible to use the
actuators with very good efficiency, which in turn gives an improved time between charging.
2.5.1 Battery level information
The following battery level information is available:
• The RCH10 hand control has a low battery LED, which starts flashing when the RCB10+ battery
has reached a low level.
• The RCB10+ Premium has a low battery sound alarm, which gives a sound when the battery has
reached a low level.
• The estimated charge level can be read using the RST10, see section 5.3.2.
When the low battery warning is activated, a few strokes remains. The number of strokes depends on the
application and the configuration in RST10, see section 5.2.7.
2
Except RE7000 which has a special interface.