REAC RCB10+, Руководство пользователя

Страница: 10 / 31

8
3.3.2 Installing RST10
To install the RST10 software on your Windows computer, do the following:
1. Go to https://www.reac.se/products/control-systems/rst10/ and download the RST10 Software zip
file.
2. Extract the zip file.
3. Double-click the file named “setup”.
4. A guide takes you through the installation. Normally, there is no need to change the suggested
settings.
If there are limitations in installation rights on the computer, you can run the portable
RST10 version instead. Double-click the file named “portable”.
3.3.3 Setting parameters
To change and set the parameters, do the following:
1. Run the RST10 from the program start menu or by double-clicking the desktop icon.
2. On the top menu, select
System > Maintain .
3. Select the correct COM port. Then click Next .
Remove the USB cable from the computer. One of the COM ports will disappear.
This is the one you should select when you have connected the USB cable again.
4. The software now collects information from all connected units. This takes some time. Wait until
the
Receiving application
window disappears.
5. Icons for the detected units appears to the left. Double-click the C icon (control box). This displays
parameter groups for the RCB10+.