© REA Elektronik GmbH, D-64367 Mühltal / Germany
+49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U -
February 2012-
Page 5 of 18
REA
Elektronik
GmbH
Rationalisierung
•
Entwicklung
•
Automation
Elektronische Geräte und Systeme
3
Description of operation
The REA TD-GPT-U is a portable, battery operated industrial printer in a rugged glass-fibre plastic housing.
Due to the wide range of operating temperature (-10 - +60°C with specified paper), the printer can be used
outdoors.
Inserting the paper is easy due to Easy Paper Loading Technology. The paper supply cover closes securely
(tested in accordance with DIN EN60068-2-6 vibrations and -29 constant shock).
A convenient OnPaperDisplay menu (OPD-Menu®) allows an easy printer configuration. The printer is connected
to other devices by an USB interface.
Charging takes about 3 to 4 hours. The standard NiMH battery pack (1500mAh capacity) allows printing 5 paper
rolls without recharging.
Intelligent power management increases the printer availability. The printer switches automatically into sleep
mode to safe battery power. It can be waked up from sleep mode over the USB interface. In sleep mode, power
consumption is much lower than self-discharge of the battery.
Parts and functions of the printer
1 Opening lever for paper compartment cover
2 Paper compartment cover
3 Key {OFF/NEXT}
5 Key {FEED/ENTER}
6 LED "STATUS" (green/red)
7 LED "Line" (yellow)
9 LED "Communication" (yellow)
11 USB Interface
12 Power supply connector
14 Battery connection - connector pair, 7 pin
15 Firmware update connector, 12 pin
17 Battery connector pair, 6 pin
