© REA Elektronik GmbH, D-64367 Mühltal / Germany
+49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U -
February 2012-
Page 3 of 18
REA
Elektronik
GmbH
Rationalisierung
•
Entwicklung
•
Automation
Elektronische Geräte und Systeme
Introduction
Technology and configuration of the product described in this manual comply with the latest national and
international standards regarding both functionality and safety. Advancements and improvements are
incorporated regularly, and, therefore, illustrations, measurements, technical data and general contents
mentioned below are subject to change without notice.
These operating instructions will help you to operate our product, which has been developed and manufactured
in accordance with the latest technology, optimally and safely. Please read this manual carefully before operating
the product for the first time and keep it available in order to reference it when needed.
If you have any further questions, please contact our staff. You can find all necessary phone numbers and email
addresses in the chapter "Service and Maintenance".
1
Symbols and their meaning
Please read all safety instructions and important information carefully.
Safety instructions regard your personal safety and are to be adhered to at all times. It is essential
to forward these instructions to all other personal using this device.
Important information refers to equipment safety, preventing damaging the printer.
Please contact REA Elektronik GmbH
.
Hints for best use of the printer
Additional information and hints
Safe operation of the printer is only granted, if the instructions in this operating manual are recognised. For
installation: Always disconnect power supply.
In case of any technical question please contact REA Elektronik GmbH.
