© REA Elektronik GmbH, D-64367 Mühltal / Germany
+49 (0) 6154 638-0 • Fax - 195 Thermal printer TD-GPT-U -
February 2012-
Page 12 of 18
REA
Elektronik
GmbH
Rationalisierung
•
Entwicklung
•
Automation
Elektronische Geräte und Systeme
9.1
Printer setup example
Bold font:
printed menu
Normal:
available settings
Italic:
comments
After entering the menu the printer prints the following:
Welcome to the OPD menu 1.0 5
Setup timeout after 10 minutes
Actual printer settings:
Ubat: 5,4V
Tbat: 24°C
(only shown if battery is inserted)
Firmware:
GE-xxxx
Density
25
Speed:
med (64)/low
Interface:
RS232/USB/Blue
COM:
9600,n,8,Tx+
Sleep time:
5 sec
Font #:
1
Char. format:
D0,W0,H0,S0,48
? Change actual settings
Press ENTER to change
Press NEXT to skip
Press NEXT+ENTER to save and exit
If the ENTER key is pressed the first available parameter is printed. Next confirms the setting and prints the next
parameter. ENTER changes the parameter.
Density:
25
Available settings:
20, 25, 30, 35, 40, 45, 50, 90(2ply
)
Speed/Quality:
med 64/ low
Available settings:
low (32)/med, med (64)/med, med (64)/low, high (96)/low
Interface:
RS232/USB/Blue
Available settings:
RS232/USB/Blue, IrDA, GeBE-IR, GeBE-COM
Baud rate:
115200
Available settings:
1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200.
COM Parameter:
n,8,Tx+
Available settings:
n, 7, Tx+ / o, 7, Tx+ / e, 7, Tx+ / n, 8, Tx+ / o, 8, Tx+ / e, 8, Tx+ /
n, 7, Tx- / o, 7, Tx- / e, 7, Tx- / n, 8, Tx- / o, 8, Tx- / e, 8, Tx-
Sleep Time:
1 min
Available settings:
OFF, 5 sec, 30 sec, 1 min, 10 min, 1 h, 12 h, 32 h
