RC Systems 10-0517, Руководство по эксплуатации

Страница: 43 / 51

UM-1096
Revision A 38
Comm Settings Menus
(cont’d)

Modbus Slave (when installed)
o
Baud Rate
allows users to set the data rate of the
communication port. The options include 9600,
19200, 38400, 57600 and 115200.
o Parity is a bit that is added to ensure that the number
of bits with the value "1" in a set of bits is even or
odd. Parity bits are used as the simplest form of error
detecting within code. The default is None.
o Remote ID is where the Modbus slave’s ID number is
entered
o Byte Order determines WORD and BYTE alignment of
data at the remote Modbus transmitter when sending
this 4-byte IEEE floating point values
o LED Enable enables the RX and TX LEDs to flash green
on valid transmit and receive transmissions. For ports
configured as master, the RX LED will flash red if there
is a Comm Error or if an exception is received. Slave
ports will cause the RX LED to flash red under the
same conditions but can also cause the TX LED to
flash red if an invalid function code is received or if
the wrong register is given.
Modbus Sl ave
Baud Rat e 9600
Par i t y None
Remot e I D 1
Byt e Or der ABCD
LED Enabl e No
Ter m. Resi st or No