20
The oral inflator of the Backup wing should be routed over the right shoulder
and can be held securely in place by passing it under the neoprene logo
wraps on the right hand shoulder of the Razor Harness webbing.
The hose should bend towards the center of the chest just above the right
shoulder D ring and should be long enough to reach the mouth comfortably.
It can be held in place in a clean streamlined fashion by passing it through a
couple of bicycle tire inner tubes placed around the large diameter inflation
hose spaced a few inches apart.
The oral inflation hose should be positioned either on top or on the inside of
the large diameter inflation hose so as not to interfere with the LPI hose to
the power inflator that is routed underneath it.
Any excess hose can be cut off to customize the length. Remove the bite
on mouthpiece, cut the hose to the desired length and then replace the
mouthpiece.
Step 5: Positioning the Oral Inflator Hose of the Backup Wing
2 Rigging the Razor BAT Wing
