19
Step 4: Adjusting and Attaching the Large Diameter
Inflation Hose of the Primary wing to the Razor Harness
2 Rigging the Razor BAT Wing
The large diameter inflation hose can be
secured to the lower shoulder strap of the
Razor Harness below the shoulder D ring
using the large Logo Wrap pro-
vided with the BAT Wing.
Please note that the BAT Wing Logo
Wrap which has to go around the large
diameter inflator hose as well as the web-
bing of the Razor Harness is larger than
the 2 Logo Wraps that come with the
Razor Harness. They should not be con-
fused as they are not interchangeable.
The orientation of the keyed hose elbow
can be adjusted as noted earlier to ensure
a streamlined comfortable routing of the
large diameter inflator hose. This is done
by loosening the locking ring a few turns
until it is possible to lift out the locking
plate of the elbow then rotating it until it
locks back into the desired orientation and
tightening the locking ring ensuring that it
has bottomed out properly and is forming a
good seal.
