Just press the
The memory num-
bers of the waypoints or events temporarily appear
on the plot screen next to their respective symbols
for about 7 seconds or until you type in one of the
numbers for a destination number.
in the desired
destination number
(
X
,
X
,
X
,)
using the numeric keys along the
side
of the front panel and then press
The
corresponding
symbol (on-screen) will
be connected with a dotted track line drawn from
your ship to the selected waypoint.
Using
marks
Whenever you want to remember your present
position on the plotter, you can press the
key. The location is saved into memory. A number
between 301 to 380 is assigned, and its symbol
is fixed on the plot display at own ship’s location.
The assigned Event mark number appears in the
message window at the plot screen lower right cor-
ner, for your reference.You can also recall the
number any time by pressing the-key and
viewing the number on the screen.
The Event’s position in
depth, and surface water temperature
can be recalled at any time by selecting that particular event mark memory
number. Press
type the Event
The Event’s L/L also appears on the
list at the assigned
memory number.
33.65
Own Ship
When the
PLOT
mode display is first selected, “own ship” will be at the
center of the plot screen. Own ship is always identified as a ( + ) shaped
symbol that is constantly blinking. As the vessel moves, the ship symbol will
eventually reach the edge of the plotting area. At that time, the plot screen
will automatically reset “own ship” back to the center of the plot display.
You can manuallyposition “own ship” back to the center of the plot screen
at any time
by
pressing
OPERATION 69
Содержание V8010
Страница 2: ...WCOLOR ECHO SOUNDER OPERATlON MANUAL...
Страница 16: ...1 q i z INTRODUCTION 8...
Страница 20: ...8 1 205 mm 13 07 _l m 332 mm Y OUTLINE DIdENS O S MI010 ECHO SOUNDER INSTALLATION 12...
Страница 127: ...MAINTENANCE...