Raytheon V8010, Руководство по эксплуатации

Страница: 72 / 133

Press The SELECT ALARM menu appears and you can now
select the
NAVALARMS
group
by
pressing
the corresponding When
has been pressed, the
SET NAV
menu
appears.
Press
Use the numeric keys to enter the drift limit distance to the right on the
SET ALARMS menu. (Input values can range from to 9.99 nautical miles).
the value is correct to activate the anchor watch alarm
and return to the Navigate-Position display.
Example: To set an anchor limit of feet,
type
0,
= 600 Feet (approx.)
In the event that you drift beyond the distance set for the anchor watch
alarm, the audio beeper will sound and the anchor alarm will be indicated
on the bottom of the display screen. The alarm will activate in any mode of
operation, including the
modes.
To silence the audible press The audio alarm will
remain silenced until the alarm condition is reset and then again detected.
The alarm symbol is in even though the audio is temporarily OFF.
The Anchor watch distance will remain stored into memory and will
become the alarm distance for every selected unless the type of
alarm and the distance value is canceled or changed by the operator.
TO CANCEL THE ANCHOR ALARM: Return to the SET NAV ALARMS menu
and press Type
0 ,0
After key is pressed, press key again to return the
unit to the previous display mode.
The OFFCOURSE alarm is used to alert you if your vessel strays too far away
from your intended track when you are steering to a specific
destination. This feature isparticularlyuseful when you need to hold a tight
course, or if you are using an autopilot, to monitor the pilot’s steering
effectiveness.
OPERATION 64