Raytheon V8010, Руководство по эксплуатации

Страница: 95 / 133

When is pressed, the display will change back to the STORE
directory. The unit will now calculate a to store
as the During the calculation process the unit will display a
message on the screen. Please wait for the
3. Store by
BEARING/RANGE
Occasionally, you to enter a into memorybydescribing
the waypoint’s position as a bearing and distance from your own current
position. This is easily accomplished with your
However, while describing a range or distance from
your vessel
should not
be a problem, it is important to make sure your ‘bearing” information is in
“magnetic” when input into the echosounder IF”’ the “Auto” magnetic
variation is “ON”.
If you are taking a bearing from your radar display, that bearing will
normally be “relative” (defines an angle from your ship’s bow)
To
determine the magnetic bearing, just
add the radar’s relative bearing to your
magnetic ship compass heading. The re-
bearing is the correct magnetic bear-
to input into the
If you wish to enter a position as
a bearing and range from your present po-
sition, press
First, type the numeric value of the bearing infor-
mation. Begin the entry with if the bearing is
less than Press when the bearing
value is displayed correctly.
N
40’23.78’
Example: Press Bearing =
w
ENTER
Now the Range (DTG) can be entered using
125’
three digits (up to 99.9). If the range is less than
- - -
10.0 miles, type a
first,
followed by the
ing
two digits. when the range value
is displayed correctly.
PRESS
MMU TO
OPERATION 87