Raymarine ST70 Instrument, Руководство по эксплуатации

Страница: 40 / 82

32 ST70+ User Reference Manual
5. If you selected the OFF or SLAVE mode, proceed from step 6. If you selected the
ON mode:
i. Press
PAGE DN
to select the lower (value) box.
ii. Scroll to set the correct variation value.
6. Press
OK
to save the value and return to the Advanced Options menu.
7. Press
CANCEL
to return to the Main Menu .
Now proceed to Changing response rate .
Changing display response rate
The display response rate determines the rate at which data readings update. You
can adjust the response independently for each display and for individual data types,
to best suit the conditions under which you are operating.
If you want to change the response at any instrument:
1. With the
Main Menu displayed, scroll to Display
Settings.
2. Press
OK
to display the Display Settings menu.
3. At the Display Settings menu, scroll to the
Response option.
4. Press
OK
to display the Response menu, then
scroll to the required data type ( Speed shown
here).
5. Press
OK
to display the response adjust box for
the data you have selected.
6. Scroll to set the response rate. A higher value
gives a quicker response rate and vice versa.
7. Press
OK
to save the value and return to the
Response menu.
8. If you want to change the response for other
data types, scroll to the required data type, then
repeat steps 5 to 7.
9. To leave response setup, ensure the Response menu is displayed, then:
i. Press
CANCEL
to return to the Display Settings menu.
ii. Press
CANCEL
to return to the Main Menu .
iii. Press
CANCEL
to return to the operational page.
i
D
111
8
4-1
Display Settings
Response
Select display response.
Press OK to select
D1
1
185-1
Response
Speed
Press OK to select
i
D1
1
186-1
Press OK to accept
Speed
12
< & > adjust response level.
CANCEL exits without saving.
85024_1.book Page 32 Tuesday, January 27, 2009 11:31 AM