Raymarine ST70 Instrument, Руководство по эксплуатации

Страница: 27 / 82

Chapter 2: Commissioning Procedures 19
Data units
The Units summary comprises two pages and
shows units currently in use. You can accept all or
change any of the data unit settings. You can set:.
•
Speed to either miles per hour, kilometers per
hour or knots.
• Distance to either miles, nautical miles or
kilometers
• Depth to either feet, fathoms or meters.
• Wind speed to either knots or meters per
second.
• Heading to either magnetic or true.
• Flow rate to either US gallons per hour, UK gallons per hour or liters per hour
• Temperature to degrees Celsius or degrees Fahrenheit.
• Pressure to pound per square inch or kilo Pascals.
• Volume to either US gallons, UK gallons or liters
• Number of engines to either 1, 2, 3, 4 or 5.
• Number of batteries to either 1, 2, 3, 4 or 5.
• Number of fuel tanks to either 1, 2, 3, 4 or 5.
Press
OK
to see the second Units summary page, and if you want to return to the first
page from the second, press
CANCEL
.
Check the information on the Units summary
pages, then with the second Units summary page
displayed, press
OK
to display the Select units
menu.
If you want to change any data units, carry out the
Changing units procedure below.
If you do not want to change any data units,
proceed from
Leaving units setup below.
Changing units
To change any data units:
1. With the
Select units menu displayed, scroll to select the type of data you want to
change, i.e. Speed, Depth, Distance, Wind Speed etc.
2. Press
OK
to display the setup page for the units
you have selected.
3. Scroll to select the required units.
4. Press
OK
to save the units setting and return to
the first Units summary page.
5. Press
OK
twice, to display the Select units
menu.
6. If you want to change any other units, repeat
steps 1 to 5 of this procedure.
6 pt
i
D11159-1
Press OK to continue
Units summary
These are your current settings.
o
KTS Speed
NM Distance
FT Depth
KTS Wind Speed
Mag Heading
G/H Flow Rate
C Temperature
i
D11161-1
Select units
Wind Speed Units
Select units to change, using <
or >.
Press OK to select
i
D11106-1
Press OK to accept
Wind Speed Units
KTS
Select required units, using < or
>. CANCEL exits without saving.
85024_1.book Page 19 Tuesday, January 27, 2009 11:31 AM