Raymarine ST70 Instrument, Руководство по эксплуатации

Страница: 24 / 82

16 ST70+ User Reference Manual
3. Press
OK
to display the Display type setup
page.
4. Scroll to select either Instrument or Autopilot ,
as required.
Note:
From this point, you must use a keypad type appropriate
to the display type you have selected.
5. Press
OK
to confirm the display type and dis-
play the Assign group page.
6. Scroll to the name of the group to which you
want to assign the display.
•
Pilot Controller group name options are:
Pilot-1 , Pilot-2, Pilot-3 , Pilot-4 and Pilot-5
• Instrument group name options are:
Inst-Helm1 , Inst-Helm2 , Inst-Cockpit ,
Inst-Flyb. , Inst-Mast , Inst-1 , Inst-2 , Inst-3 ,
Inst-4 , Inst-5 , Inst-6 , Inst-7 , Inst-8 , Inst-9 , Inst-10 , Inst-11 , Inst-12 , Inst-13 , Inst-
14 and Inst-15.
7. Press
OK
to save the group assignment and
display the Assign order in group page. Each
display in a group has a discrete number, and
these numbers determine the order in which
displays are selected within the group during
normal operation, when the Select Display but-
ton is used.
8. Scroll to the required number.
9. Press
OK
to save the group settings and dis-
play the Link keypad to group page.
10. If you have not allocated keypads to the group containing the display you are set-
ting up:
i.
Press
OK
at a keypad you want to link to this group.
ii. Wait until the confirming popup disappears.
iii. Repeat i and ii for each keypad you want to link to this group.
Note:
Remember you can only link Instrument keypads to In-
strument groups, and Pilot Controller keypads to Pilot
Controller groups.
11. When you have allocated all the required key-
pads to this group, press
MENU
to save the
group settings and display the Configure this
display page.
12. Repeat steps 3 to 11 for each display.
i
D1
1
144-1 Press OK to accept
Display type
Autopilot
Configure this display as an instrument or
autopilot controller
i
D1
1
145-1
Press OK to accept
Assign group
Assign into a group of one or more displays. All
displays must be the same type.
Pilot-2
i
D1
1
146-1
Press OK to accept
Assign order in group
2
Assign the order of this display
within the group.
D1
1
147-1
Press MENU to finish
Link keypad to group
Press OK on each
keypad that you want
to link to this display
group
85024_1.book Page 16 Tuesday, January 27, 2009 11:31 AM