Raymarine ST70 Instrument, Руководство по эксплуатации

Страница: 14 / 82

6 ST70+ User Reference Manual
The initial setup procedure enables you to:
•
Select system language.
• Select vessel type.
• Set up display types & groups (see Figure 1-2 )
• Set time and date formats.
• Set local time value.
• Set units.
Display types & grouping
Figure 1-2: Display type & group setup summary
During initial setup, you allocate each ST70+ display as either an Instrument or a Pilot
Controller, then define groups of Instruments and Pilot Controllers (see
Figure 1-2: ,
Display type & group setup summary ). Each group is controlled by a common keypad
or keypads. For example, you could group together all Instruments fitted at the helm
and control them with a single keypad.
When grouping displays together, the following rules apply:
•
All displays in a group must be set to be the same type, i.e. all Instruments or all
Pilot Controllers.
• A ‘group’ can be just one display, or a number of displays up to a maximum of four.
• The keypad(s) allocated to a group must be appropriate to the display function, i.e.
Instrument keypad for Instrument groups, Pilot Controller keypad for Pilot Control-
ler groups.
OK OK
OK
OK
To
Time & Date
summary
OK
OK
Link keypad
to group
Display type
Select display to assign function and allocate to group
To be the same type for all
displays in a Group
To be different for each
display in a Group
Popup
On keypad you want to link,
press
YES
NO
OK
From
Vessel type
setup
System
configuration
Configure
this display
Are
all displays &
groups set as
required?
YES
NO
D11148-1
MENU
MENU
Assign order
in group
Assign group
Link keypad
to group
Keypad linked
Link keypad
to this group?
85024_1.book Page 6 Tuesday, January 27, 2009 11:31 AM