Product dimensions - Raymic handset
The Raymic handset dimensions for both cradle
mounting and clip mounting are provided.
The Raymic handset is fitted with a coiled cable. Ensure
sufficient space is available below the desired mounting
area to accommodate the cable.
3.4 Mounting
Tools required for installation
1.
Power drill
2. Pozi-drive screwdriver
3.
Adhesive tape
4.
Suitable size drill bit
5. 89 mm (3
½
in) Hole saw (used for speaker mounting)
6. File (for speaker cut-out)
Mounting the Base station
Follow the steps below to mount the Base station.
Before mounting the Base station ensure that you have:
• selected a suitable location (a clear, flat surface is
required).
• identified the location for additional components, such
as the Handset or Speaker etc.
• identified the relevant cable connections and route
that the cables will take.
1. Using the supplied mounting template, mark the
location of the fixing holes on the mounting surface.
2. Drill holes for the mounting fixings using a drill with
a suitable sized drill bit.
3. Screw the fixings approximately half way into the
holes in the mounting surface.
4. Place the Base station over the fixings screws and
push down to lock into position.
5. Fully tighten the screws.
6. Connect the necessary cables.
22
81377-1-en_US_PRINT.pdf 22
12/21/2017 9:05:36 PM
Содержание Ray 90
Страница 1: ...81377 1 en_US_PRINT pdf 1 12 21 2017 9 05 36 PM...
Страница 104: ...Owner notes 81377 1 en_US_PRINT pdf 104 12 21 2017 9 05 38 PM...
Страница 105: ...Owner notes 81377 1 en_US_PRINT pdf 105 12 21 2017 9 05 38 PM...
Страница 106: ...Owner notes 81377 1 en_US_PRINT pdf 106 12 21 2017 9 05 38 PM...