Raymarine e7, Руководство по установке

Страница: 48 / 124

5. Cable coupler.
6. Thermal camera.
7. Video connection.
Important notes
• You can control the thermal camera using your multifunctional
display. The Joystick Control Unit (JCU) is optional, but can be
used in conjunction with the multifunctional display to control the
thermal camera if required.
• “Dual payload” thermal cameras include 2 independent lenses; 1
for thermal (infrared) and visible light, 1 for thermal (infrared) only.
If you only have 1 display you should only connect the video cable
labelled “VIS / IR” (visible light / infrared) to the display. If you have
2 or more displays you should connect 1 cable to each display.
• You can only view the thermal camera image on the multifunction
display to which the camera is physically connected. If you want
to view the thermal camera image on more than 1 display you
must obtain a suitable third-party video distribution unit.
• For further information regarding the camera’s installation
(including connections and mounting), refer to the installation
instructions that accompany the camera.
Thermal camera cables
Cabling requirements for thermal cameras.
Camera to network switch
A network patch cable is required to connect the camera to the
network switch. The connection is made between the camera
cable tail and the network switch via the coupler (supplied with the
camera). Network patch cables are available in a variety of lengths.
Joystick Control Unit (JCU)
An Ethernet (with power) cable is used to connect the JCU. The JCU
is supplied with a 7.62 m (25 ft) Ethernet cable for this connection. If
you require a different length contact your dealer for suitable cables.
Power over Ethernet (PoE) injector to network switch
A network patch cable is required for connecting the PoE injector
to the network switch. Network patch cables are available in a
variety of lengths.
Video cables
Contact your dealer for suitable cables and adaptors.
48 e7 / e7D — Installation instructions