Raymarine e7, Руководство по установке

Страница: 84 / 124

1. Select the fishfinder page.
2. Check the fishfinder display.
With the fishfinder active you should see:
• Depth reading (indicates the transducer is working). The
depth is shown in large white numbers at the bottom left of
the screen.
5.6 Thermal camera setup and checks
To ensure correct operation of the thermal camera you should setup
and check the camera’s main functions.
Before proceeding ensure that the camera is connected correctly,
according to the instructions provided. If your system includes the
optional Joystick Control Unit (JCU) and PoE (Power over Ethernet)
injector, ensure these units are also connected correctly.
Set up the camera
You will need to:
• Adjust the image (aspect ratio, contrast, brightness, and so on).
Check the camera
You will need to:
• Check the camera movement (pan, tilt, zoom).
• Check the camera “home” position is appropriate.
Adjusting the thermal camera image
With the thermal camera application displayed:
1. Select
Menu .
2. Select Adjust Contrast .
3. Select the Contrast, Brightness, or Color option as appropriate.
4. Use the rotary control to adjust as required.
Panning, tilting, and zooming the thermal image
There are 2 ways of controlling the thermal camera using the
thermal camera application:
• Using the touchscreen and the UniControl’s rotary control.
• Using the UniControl’s joystick and rotary controls.
To pan and tilt the thermal camera using touch actions:
84 e7 / e7D — Installation instructions