16
Manual Control Push Buttons
The two manual control push buttons gives a wide selection of user control:
1. Power Control – 100%, 80%, 60%, 40%, 20% of maximum. (Factory
Default is 100%)
2. Photocell Control – 3 levels, 25 Lux on, 50 Lux off, 10 Lux on 30 Lux off,
5 Lux on 15 Lux off and photocell disable.
3. Turn LED indicators on & off
4. Illuminator Reset Options
5. Disable Remote Controller and enter Operating Mode,
or Enable Remote Controller and enter Programming Mode
6. Button Enable & Disable
In short, the LHS button selects your mode/category, indicated by
specific behaviours of the LHS LED - and the RHS button selects your
chosen level/setting with that pre-selected mode – also indicated by
specific behaviours of the RHS LED.
The buttons are active in both programming mode and operating mode
regardless of whether a PIN is present, unless you have previously disabled
the manual buttons.
Buttons are
accessed by
removing the base
plate at the
bottom of the unit
www.ray
led
.com
Ray
LED
Tel : +
33
(0)
4 58 00 15 74
