10
LED Status Indicators- Feedback system
There are two tri-coloured LEDs visible on the base of the VARIO2
POE illuminator. The two LEDs provide important operating and
status information.
The status information provided by each of these LEDs differs
depending on which of the two operating modes the VARIO2
POE illuminator is in: (A) Programming OR (B) Operating
The LED Indicators also give feedback if you are using the
Remote, PIN Function or Manual Control Modes – Please see
Pages 14 to 22 for detail on the LED status indicator feedback for
these functions
(LHS)
(RHS)
Programming Mode and Operating Mode
Factory Default: On initial power-up, the illuminator is in
Programming Mode.
On powering up the illuminator, it automatically enters
programming mode to allow the user to adjust set-up and
operation. The programming mode automatically times out after
7 Days or until the user actively disables the programming mode
and changes to Operating Mode. However, if you use the
manual push buttons at all during this time, the illuminator will
automatically enter operating mode 30 minutes after the last
button press.
Base Plate Pictured ON
www.ray
led
.com
Ray
LED
Tel : +
33
(0)
4 58 00 15 74
