Installation Guide
ARCH019
Lumination
®
LED Luminaire
Product Codes 75521, 75526, 75529, 75541, 96690, 96710, 62186
(Tetra
®
Contour)
BEFORE YOU BEGIN
Read these instructions completely and carefully.
WARNING / AVERTISSEMENT
The light guide is made to use together with the light engine.
Please ensure you read the installation guide and
warnings of light engine before installing.
Le guide est conçu pour une utilisation de pair avec un module
DEL Contour. S’assurer de lire les instructions d’installation et les
avertissements avant de procéder à l’installation.
Preparation
Step 1:
1
2
3
Remove the protective film from
the light guide.
Mark the light guide at the
required length, adding 0.5 in.
(13mm) for every 16 in. (406mm)
to account for shrinkage during
the forming process.
Cut the light guide to the
required length using a hacksaw,
chop saw (cross cut or veneer
blade only), band saw, or other
appropriate plastic cutting tool.
4
Silicone Bend-Aid
Fill the entire light guide channel with the GEXNBA Silicone Bend-Aid(s)
and press into place. Bend-Aid must be installed prior to heating and
forming. The GEXNBA Silicone Bend-Aid is reusable.
WARNING / AVERTISSEMENT
DO NOT heat and form the light guide
with the light engine installed.
NE PAS chauffer le guide alors qu’il contient le
module DEL Contour.
