6
Attach illuminator to wall, housing or pole using U-bracket provided or
dedicated Ray
LED
bracketry.
Step 3 : Wiring
The illuminator is supplied with a terminated CAT5 cable with a waterproof
Ethernet connector (supplied loose i.e. not fitted). Premium variants also
have an auxiliary multi-core cable fitted.
Power via PoE
Connect an Ethernet cable (category 5 or better) using the T-568B wiring
standard between the Power Sourcing Equipment (PSE) and the illuminator.
Ensure that the PSE is sufficiently rated to power the VARIO2 PoE device as
follows:
Model
(Standard and Premium)
PoE Requirement
VAR2-POE-w2-1, i2-1, i2-1-C
IEEE 802.3af (HP PoE) ≤12.95W
VAR2-POE-w4-1, i4-1, i4-1-C, i6-1 IEEE 802.3at (HP PoE) ≤25.5W
VAR2-POE-w8-1, i8-1, i8-1-C
4-pair PoE ≤51W
The maximum Ethernet cable length is 100m (328’) without boosting the
power.
Ensure you make a waterproof connection to the RJ45 as shown below.
Ensure the connector is waterproof and sealed after the connection is
made.
To illuminator
RJ45-RJ45 connector
To PSE
Please Note :
For Premium Models, illuminator can also be powered by 24V DC
www.ray
led
.com
Ray
LED
Tel : +
33
(0)
4 58 00 15 74
