Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-A6000D~10000D
23
a) MOD SINGLE
Figure 10 MOD Signal Circuit Diagram.
This signal is 5/24V compatible, and reverse connection is not allowed.
MOD is used to control the laser output and off when the key switch is hit ON and t
he laser is working out of light external control mode.When the key switch hits REM, and
the laser is operating in outgoing light control mode, MOD and XP1-A2 (at this time, the
A2 bit outgoing light enable signal) are jointly used to control the laser output and off (in
REM mode, outgoing light control can be controlled only by A2, to be customized).
