Wuhan Raycus Fiber Laser Technologies Co., Ltd.
User Guide of RFL-A6000D~10000D
42
k) Output analog and outgoing light signals through the control board.
l) Check that the red light of the laser tricolor lamp is on, and the laser is outputting light.
6.4 Emission external control through programming mode on the ON mode
Figure 28 Wiring diagram of Emission external control through programming mode on the ON
mode.
Operation methods
：
a) The rear panel air switch hits ON to supply power to the laser.
b) The front panel key switch is turned ON to put the laser into ON mode;
c) Open the upper computer software.
d) Click the red ON button to view the red light.
e) Click the main power ON button in the upper computer software to turn on the main power.
