![background image](http://html.mh-extra.com/html/raven/precision-autoboom-g1/precision-autoboom-g1_calibration-and-operators-manual_788825003.webp)
Manual # 016-0130-019
1
C
H A P T E R
I
N T R O D U C T I O N
Congratulations on your purchase of the Raven Autoboom system! This system is
designed to provide worry-free operation of your hydraulically controlled booms.
Once set up, your system is very easy to use and requires almost no attention.
When you first install your system, it will need to be calibrated. To calibrate your
system, make sure it is warmed up and that the hydraulic oil is at normal operating
temperature. If you fail to warm the system, it may not perform properly. It is
also important to make sure the machine is running at a sufficient engine speed so
that the hydraulic pump is able to supply full flow to the system.
The following instructions are designed to assist you in the proper calibration of
your G1 system. Installation should be complete before calibrating the system. If
you have any questions regarding the installation of the system, see the Autoboom
Installation Manual for the specific machine you are using.
Important:
For open center hydraulic models, all calibration
procedures should be done at full engine RPM.
Содержание PRECISION AUTOBOOM G1
Страница 1: ...Calibration and Operator s Manual G1 Systems ...
Страница 2: ......
Страница 14: ......