Autoboom G1 Calibration and Operator’s Manual
8
Controlling the
Down Speed of
the Booms
A G1 system only controls the down speed of the boom. This was set during the
calibration process. If a boom appears to be too heavy, refer to the ‘Setting the
Down Speeds’ section in the Calibration chapter. The faster the drop speed of the
boom, the heavier the boom will be using the Pressure Dial on the controller. The
Pressure Dial is what controls the down speed of the booms. Remember that the
slowest (or lightest) setting is zero (0) and the fastest (heaviest) setting is ten (10).
Helpful Hint:
The hillier the terrain, the heavier the
Autoboom Pressure Dial needs to be set.
‘10’ Setting
‘0’ Setting
Содержание PRECISION AUTOBOOM G1
Страница 1: ...Calibration and Operator s Manual G1 Systems ...
Страница 2: ......
Страница 14: ......