Autoboom G1 Calibration and Operator’s Manual
4
Setting the Pressure Alarms
1. Turn the #1 screw counter clockwise until the alarm shuts off. Give the
#1 screw another 1/2 turn counter clockwise.
Setting the Down Speed
1. Turn the Pressure Dial to 10.
2. Depress the down function on the sprayer joystick for either the left or
right boom. The Auto Pressure enable light for that side should turn on
and the boom should go up.
3. Turn the #2 screw counter clockwise until the boom begins to fall. The
goal is that the booms fall at a 3 to 4 second rate from full up to resting
on the tire. You will need to raise the boom up with the joystick then
Important:
If the boom did not go up, turn the #2 screw
clockwise 15 revolutions. Turn the #3 screw counter
clockwise 15 revolutions.
‘10’ Setting
Содержание PRECISION AUTOBOOM G1
Страница 1: ...Calibration and Operator s Manual G1 Systems ...
Страница 2: ......
Страница 14: ......