Raven ISO Product Controller II, Руководство по эксплуатации

Страница: 58 / 138

C
HAPTER
5
48 ISO Product Controller II and Hawkeye Operation Manual
DTC ALARMS STATUS INDICATOR
The alarm indicator provides a visual status of the Hawkeye
®
Nozzle Control System and Sidekick Pro ICD injection
pump alarms during field applications. The alarm status indicator provides the following display states:
Touch the Alarms Status indicator to quickly access the diagnostic trouble code (DTC) List and review any current
or previous alarm condition information. Refer to Chapter 8, Troubleshooting, for additional assistance with
diagnostic trouble codes and using the DTC list.
MASTER SWITCH STATUS
NOTE: If a Raven ISOBUS switch box, or another compatible master switch, is connected
to the Hawkeye
®
nozzle control system, the current status of the master switch
will be displayed in the control mode area. This is a display only and the physical
switch must be used to toggle the system master on or off during field
applications.
TANK VOLUME INDICATOR
The system provides a calculated volume of product
remaining in the tank as a tank indicator in the application
information area. Select this indicator to access the Tank Fill
Config prompt.
NOTE: A tank capacity value must be entered to allow the tank volume indicator to display the tank level.
VOLUME APPLIED
Volume applied is for quick reference of the volume of product dispensed during a field operation. The
field volume tally is displayed if there are less than three injection products and the NCV Performance
Indicator is off.
NOTE: Tally registers from the softkeys area and refer to Chapter 6, Tally Registers, for additional assistance
with using the field and total volume registers.
SECTION STATUS DISPLAY
The Hawkeye
®
system provides the status of
each configured section on the home display.
For standard Hawkeye
®
section control, or
Hawkeye
®
Virtual Section mode, the boom
valve section will be a rectangle above triangles
representing the nozzle control sections. The
triangles will change color when the section is
OK. The system status is normal and no alarm conditions are currently
present.
Caution. A minor alarm condition has been detected. The control system is
operating normally, however, the system has detected that a condition exists
which could impact the current application.
Critical. A critical system condition has been encountered. The control
system is not responding as expected and the operator should cease
application and troubleshoot the issue before resuming operations. The
system will not apply in this state
Master
Status
Off On
HD Section
Off or
Section
Disabled
Off
On
HD Section
On