Raven ISO Product Controller II, Руководство по эксплуатации

Страница: 28 / 138

C
HAPTER
3
18 ISO Product Controller II and Hawkeye Operation Manual
SIDEKICK PRO ICD INJECTION INITIAL SETUP AND CALIBRATION
INJECTION WIZARD AND CALIBRATION
The injection wizard must be completed the first time that the Sidekick Pro ICD system is powered up on the
ISOBUS network or if the default system settings are reset. The injection wizard allows the operator to quickly
assign the detected devices on the ISOBUS to the correct product channel.
Review the following sections for assistance with completing the injection wizard for the Sidekick Pro ICD Direct
Injection system.
NOTE: Refer to the UT operation manual for additional setup, operation, or calibration information before
operating the Sidekick Pro ICD Direct Injection system or features.
INJECTION WIZARD
1. Turn the UT power on and allow the display to power up and initiate the ISOBUS system.
NOTE: If properly connected and powered, the UT will automatically detect the Sidekick Pro ICD Product
Controller II ECU. If the Product Controller II ECU is not detected by the display terminal, troubleshoot
the Sidekick Product Controller II ECU and restart the system. Refer to “Troubleshooting” section on
page 57 for assistance with connection issues. Contact a local Raven dealer for additional
troubleshooting assistance if the Product Controller II ECU is still not detected.
2. Once the Sidekick Pro ICD Product Controller II ECU is detected, the Sidekick Pro ICD Menu button will display
in the UT Menu.
FIGURE 1. Sidekick Pro ICD Menu Button
3. Press the Hawkeye
®
Menu button.
FIGURE 2. Hawkeye Menu Button
4. Select the Tools Menu.
FIGURE 3. Tools Menu Softkey
5. Press the Equipment Settings tab.