Raven ISO Product Controller II, Руководство по эксплуатации

Страница: 19 / 138

Introduction: Hawkeye® Features 9
INTRODUCTION
But what if the field you are working is not square? What if the field you are working has numerous waterways,
tree lines, terraces, or other obstacles that require the equipment operator to follow the curvature of the feature
during application? When applying around curves and corners, traditional application systems do not compensate
for the speed variance observed at the inner and outer ends of the boom or implement. The difference in
coverage across the large and ever expanding sizes of application equipment on the market today can result in
large areas of under or over application and will reduce the application efficiency, and negatively impact yields.
Turn compensation, standard with the Hawkeye
®
nozzle control system, helps ensure an even flow rate while
applying around curves and corners, even when operating with the largest of application equipment sizes on the
market. Turn compensation automatically reduces or stops the flow rate of nozzles toward the inside of the curve,
while increasing the flow rate at the outside, to help ensure an even, efficient application to address crop
conditions, minimize crop damage, and improve yields. Refer to the Tools Menu Settings Definitions section on
page 22 for additional information on Turn Compensation.
WHEEL TRACKS
The wheel track option allows the user to increase the flow rate of two nozzles anywhere on the boom by up to
30% over the rest of the nozzles in order to maintain optimal coverage in the turbulent air conditions behind
vehicle wheels. With the push of a button, reset the nozzles back to their original flow rate or increase the flow on
other nozzles. Refer to the “Nozzle Control Valve Diagnostic Definitions” on page 53 for additional information on
Wheel Tracks.
VIRTUAL SECTIONS
Whether one section or ten, the Hawkeye
®
Virtual Section feature will automatically divide the boom sections into
as many as 16 virtual sections. This feature is standard on all Hawkeye
®
systems and increases boom section
resolution. When combined with automatic section control on the task controller, this will increase spraying
efficiency, enhance product mapping, and save time and input costs.
HAWKEYE HD INDIVIDUAL NOZZLE CONTROL
Do you desire more resolution, accuracy, and savings than standard boom sections or virtual sections can
provide? Unlock the Hawkeye
®
HD Individual Nozzle control feature and turn your sprayer into a precision
application machine. The Hawkeye
®
HD feature turns your existing nozzles into individual boom sections and
provides you the finest spraying resolution and improved accuracy in product application, which ultimately gives
you maximum product savings. Contact a local Raven dealer for more information.
DIRECT INJECTION
The Raven Sidekick Pro ICD Direct Injection system is designed to provide efficient and accurate application of
liquid chemicals applied from an injection module. By using a separate injection module or tank, the system
eliminates mixing chemicals in the tank, reduces chemical waste, and simplifies equipment care and maintenance.
Connect up to five injection systems to the Viper 4 and ISOBUS to control the whole system through the
Hawkeye
®
user interface screens on the universal terminal. Select a high flow injection system to control a wide
range of chemical flow rates from 5 - 200 oz/min. Select a low flow injection system to provide chemical flow rates
from 1 - 40 oz/min. Refer to the “Hawkeye® Nozzle Control and Sidekick Pro ICD Setup” section on page 21 for
additional information on Direct Injection configuration