68
ENGLISH
4 SAFETY WARNING
4.1 WARNINGS FOR THE
INSTALLER
Observe the
prescriptions contained
in this manual.
T h e i n s t r u c t i o n s
f o r a s s e m b l y a n d
disassembly of the
appliance are reserved
for specialist technicians
only.
The installation, use
and maintenance of
the product must be
in accordance with
the manufacturer’s
instructions and in
compliance with the
regulations. Failure
to comply with the
instructions and any
incorrect operations may
give rise to hazardous
situations, damage
to property, animals,
health problems or
malfunctioning.
Installation, functional
testing and maintenance
should only be carried
out by authorised,
qualified personnel.
The cladding must be
made in such a way that
the user cannot gain
access to hazardous
parts.
The installation and
maintenance of the
product must be carried
out exclusively by
qualified personnel with
suitable knowledge of
the product itself. Use
only original spare parts
recommended by the
manufacturer.
Responsibility for the
works carried out in the
location of the appliance
is, and remains, with
the user; the latter is
also responsible for
carrying out the checks
relating to the proposed
installation solutions.
The installer must
comply with all local,
national and European
safety regulations.
The appliance must be
installed on floors with
adequate load bearing
capacity.
Check that the chimney
flue and air inlet set-ups
conform to the type of
installation.
Before starting the
assembly or disassembly
phases of the appliance,
the installer must
observe the safety
precautions required by
law and the following
indications in particular: