80
ENGLISH
9.3 OPERATION
9.3.1 Combustion control
Combustion is adjusted using the air regulator
(A) (Fig. 9.2). Turning it toward the symbols (+) or
(-) a higher or lower flow of combustion air will
be obtained and consequently a faster or slower
combustion will result.
9.3.2 Glass cleaning
During operation, it is possible to facilitate the
cleaning of the ceramic glass by means of the
adjustment lever (A) (Fig. 9.2) without having to
open the door.
If the lever is opened completely (+) a flow of
air hits the ceramic glass surface, cleaning it. To
carry out this operation.
Product images are for illustrative purposes only.
A
Fig. 9.2
10 CLEANING AND
MAINTENANCE
Cleaning can be carried out by the user.
Maintenance operations must be performed by
an authorised technical assistance centre.
Before carrying out any cleaning and/or
maintenance operations, take the following
precautions:
• Ensure that all appliance parts are cold.
• Make sure that the ashes are completely
extinguished.
• Use personal protective equipment provided
for by Directive 89/391/EEC.
• Ensure that the main power switch is switched
off (if present).
• Make sure that the power supply cannot be
accidentally reactivated. Disconnect the plug
from the wall socket (if present).
• Always use appropriate equipment for
maintenance.
• Once maintenance or repair operations have
been completed, before putting the appliance
back into service, reinstall all the safety guards
and reactivate all the safety devices.
10.1 ROUTINE MAINTENANCE
CLEANING PROGRAM
10.1.1 Routine cleaning (User)
EVERY
TIME THE
APPLI-
ANCE IS
TURNED
ON
EVERY
WEEK
1 MONTH
Grate
(Fig. 10.1)
X
Ash drawer
/ compart-
ment
(Fig. 10.2)
X
Glass
(Fig. 10.3)
X
10.1.2 Routine maintenance (certified
technical service centre)
1 YEAR*
Gaskets (door, refractory cements,
etc...)
X
Flue manifold
X
Door safety
X
Flue system (refer to section
“Maintenance of the smoke
system”)
X
Appliance (refer to section
“Appliance maintenance”)
X
*
At least once a year or every 4000 kg of fuel
burned.
