Rauch MDS 8.2, Инструкция по эксплуатации

Страница: 73 / 146

Machine settings
67
8
Example for full border spreading during late fertilising:
Figure 8.6: Full border spreading during late fertilising
Full border spreading during late fertilising mode refers to a spreading process in
which a bit more fertiliser lands beyond the border of the field. Therefore, there is
a slight underfertilisation at the field boundary.
The following settings are to be applied to the machine according to the fertiliser
chart:
Specified parameters :
Type of fertiliser: ENTEC 26 COMPO BASF
Working width: 12 m
Spreading disc type: M1
Forward speed: 10 km/h
Application rate: 300 kg/ha
NOTICE
On the full border spreading side , both spreading vanes must be set to the
value stated in the fertiliser chart.
On the other spreading disc, the spreading vanes remain in their late fer-
tilising position.
Mounting height: 0/6 (A = 0 cm, B = 6 cm)
Metering slide adjustment: 160
PTO speed: 540 rpm
spreading vane adjustment
Full border spreading side:
Other spreading disc (late fertilising posi-
tion):
A3-A3
C3-B2