Rauch MDS 8.2, Инструкция по эксплуатации

Страница: 122 / 146

Maintenance and service 12
116
Case 1:
Bolt can be inserted into the metering opening and has less than 1 mm
clearance.

The setting is good .

Remove the bolt from the metering opening.

Reassemble the spreading discs.
Case 2:
Bolt can be inserted into the metering opening and has more than 1 mm
clearance.

A new setting is required.

Remove the bolt from the metering opening.

Proceed with chapter [12.5.2] .
Case 3:
Bolt cannot be inserted into the metering opening.

A new setting is required.

Remove the bolt from the metering opening.

Proceed with chapter [12.5.2] .