Rational iCombi Pro Series, Руководство по эксплуатации

Страница: 90 / 112

15 | Automatic cleaning - iCareSystem
90 / 112 Operating instructions
>
The message is displayed: Remove cleaner tablets - manual rinse
2. Open the cabinet door.
3. WARNING! Danger of chemical burns! Wear tight-fitting protective glasses and chemical-safe protective
gloves for reliable protection when handling Active Green cleaner tablets. Remove the Active Green cleaner
tablets from the cooking cabinet and dispose of them.
4. Close the cooking cabinet door.
5. Press the button
6. Rinse the cooking cabinet using the hand shower.
7. Close the cooking cabinet door.
>
The display will show when the unit can be used again. Once the time has elapsed, an acoustic signal will
sound.
>
The message is displayed: Abort successful - please check the cooking cabinet for cleaner residues
TIP
If there is a power outage during the automatic clean, the automatic clean will be interrupted. When the power
supply is restored, the automatic clean will continue.
15.7 Forced cleaning
If you have activated a forced cleaning process, you will be asked to clean the unit after a defined period of time.
You cannot work with the unit again until the cleaning has been performed.
1. Press the button
2. Press the button Cleaning
3. Press the button Forced cleaning
4. To activate the forced cleaning process, press the button: ON
5. To set how long you would like to pass before you receive a reminder to clean the unit, press the button: Time
until cleaning reminder Please note that you should not indicate the operating time here, but rather the time
that you want to pass until the reminder.
6. Select a value from 1 to 24 hours on the scale.
7. To set the number of hours the cleaning can be pushed back until the reminder, press the button: Forced
cleaning delay time
8. Select a value from 1 to 24 hours on the scale.
>>
The footer shows how many operating hours remain until cleaning needs to be carried out.
15.8 Cleaning plan
With the help of a cleaning plan, you can determine on which days of the week a forced cleaning process [ } 90]
must be carried out.
1. Press the button
2. Press the button Cleaning
3. Press the button Cleaning time schedule
4. If you would like to be able to postpone the cleaning by a defined period, press the button: Cleaning mode
5. Press the button Warning
6. To set the unit to clean itself as soon as a cleaning request appears, press the button: Cleaning mode
7. Press the button Forced cleaning .
8. Select the desired day of the week.
9. Press the button ON .
10. Set the time when you want to receive a reminder to clean the unit.
>>
The footer shows how long remains until cleaning needs to be carried out.