Rational iCombi Pro Series, Руководство по эксплуатации

Страница: 43 / 112

6 | Manual cooking
Operating instructions 43 / 112
6 Manual cooking
With the manual modes, the iCombi Pro supports you in your personal craft.
By selecting this mode, you set the climate and select whether you want to cook the food in steam, with
convection heat or with a combination of steam and convection. Then you set the cooking cabinet temperature,
the air speed and cooking time and make all the necessary decisions yourself. This gives you control to ensure the
food is cooked exactly as your want it.
Cooking modes
Cooking cabinet humidity
Cooking cabinet temperature
Cooking time
Core temperature
Additional functions
6.1 Adjusting cooking result to own requirements
6.1.1 Cooking parameters
Cabinet temperature
With this cooking parameter, you can set the temperature in the cooking cabinet. If you set the temperature to
boiling temperature in the
Steam mode, the following symbol will be displayed:
You can view the current cooking cabinet humidity and cooking cabinet temperature as follows:
1. Press and hold the button:
>
After 10 seconds, the current cooking cabinet temperature will be displayed.
2. To revert to the set parameter values, release the button.
Cooking cabinet humidity
With this cooking parameter, you can set the humidity in the cooking cabinet.
n
In the Steam mode, the cooking cabinet humidity is 100 % and cannot be changed.
n
In the Combination of steam and hot air mode , extra humidity is injected by the steam generator in addition
to the humidity from the food. If the set cooking cabinet humidity is exceeded, the cooking cabinet will be
dehumidified.
n
In the Hot Air Mode , the humidity is not injected by the steam generator, but comes from the food. If the set
cooking cabinet humidity is exceeded, the cooking cabinet will be dehumidified.
Cooking time
With this cooking parameter, you can set the time in which the food will reach the desired cooking result. If you
have set the cooking time, the
core temperature cooking parameter will not be available.
Alternatively, you can let your unit run uninterrupted with the settings you apply. To do this, select continuous
operation.