Rational iCombi Pro Series, Руководство по эксплуатации

Страница: 57 / 112

10 | iProductionManager
Operating instructions 57 / 112
When the desired temperature is reached, you will be asked to load the unit. The symbol appears next to the
shelf level.
After you have loaded the unit, the shelf level shows how long the food stays in the cooking chamber.
When the cooking process of the ticket is finished, you will be asked to unload the unit. The symbol appears
next to the shelf level. The cooking time is 00:00.
10.4.1 Combination check
Each ticket that you want to place in the iProductionManager is checked to see if the new ticket matches the
tickets already placed and if they can be placed at the desired time. The tickets are separated based on the
following 3 values ​​and checked independently:
n
An operating mode is assigned to each ticket. It is checked whether the operating modes fit together.
n
A cooking chamber temperature is assigned to each ticket. It is checked whether the cooking chamber
temperatures match.
n
A cooking chamber humidity is assigned to each operating mode. It is checked whether the cooking chamber
humidity levels match.
Both manual operating modes and intelligent cooking paths are tested for their compatibility. You can only
combine cooking paths that are cooked in the same climate. Cooking paths that go through different climates, like
for example low temperature roasts cannot be combined with other tickets.
10.4.2 Placement logic
Based on the combination check, the iCombi Pro decides in which position the ticket will be placed. Depending on
the result of the check, the tickets are optimally placed in the iProductionManager. The iProductionManager uses a
coloured marking on the shelf levels to indicate if a new ticket has an effect on already placed tickets:
n
If the shelf levels are marked in yellow, you can place a ticket, but other already placed tickets are moved.
n
If the background is red, you cannot place the ticket, because a ticket is already being processed.
If you move a ticket, the entire block where the ticket was placed after the combination check is moved.
10.4.3 Close planning gaps
You can programme your unit to automatically close the time gaps that arise when placing tickets across all shelf
levels.