Rational iCombi Pro Series, Руководство по эксплуатации

Страница: 40 / 112

5 | Intelligent cooking - iCookingSuite
40 / 112 Operating instructions
5.4.4 Information
During a cooking process, the cooking steps the unit is currently performing will be displayed.
Preheat
The unit will be preheated to the temperature that is set either as the standard setting in the manual modes or in
the intelligent cooking processes.
Residual time
The intelligent cooking process stills needs the time displayed to finish.
Cooking process end
The end of the cooking process has been reached.
5.4.5 Options
If you have started a cooking path, all the available options are displayed. You can already select the Overcrust and
Maintain options when the cooking path is running. You can only select the options Change core temperature
probe , New batch , Continue with time and Heat up to output temperature when the end of the cooking path has
been reached.
Hold
With this option, either the cooking cabinet climate or the core temperature of the food is held for a certain time. If
you select this option, the food will be held at the preset cooking cabinet temperature or the core temperature for
up to 24 hours. This prevents overcooking. To keep cooking losses as low as possible, it is recommended that the
food only be left in the cooking cabinet with the
Hold option for a short time.
In some cooking processes, such as overnight boiling, the Hold option is the last cooking step and is automatically
started once the desired cooking result has been achieved. If you are cooking food of different sizes, plan a longer
hold phase so that all the pieces of food reach the desired core temperature.
Well-matured meat, smaller meat pieces and game should not stay in the cooking cabinet with the Hold option for
too long. Very young and insufficiently matured beef will on the other hand become tender.
1. To adjust the parameters of the Maintain option, press the button:
2. Adjust the parameters as required.
>>
When the end of the cooking path has been reached, the Maintain cooking step is automatically started.
Move
Select this option if you are cooking foods of different sizes or different foods with different cooking levels using
the core probe:
1. If the set core temperature is reached, open the cooking cabinet door.
2. Insert the core probe into a larger piece of the food or the food with the higher core temperature.
3. Remove all the smaller pieces of the food from the cooking cabinet.
4. Close the cooking cabinet door.
5. Press the button
>
A window appears in which you can set the core temperature.
6. Select the desired core temperature.
>>
Your setting will be applied automatically after just a few seconds.
Repeat this step until all the food has reached the desired core temperature.
New batch
With this option, you can load the unit with a new batch and continue the cooking process with the defined
cooking parameters. First you will be asked to unload the unit and then load it again. When you have loaded the
unit with a new batch and you close the cooking chamber door, the cooking path continues.