Manual-
(Group B4) cueing & looping
To access this group, press the
GROUP
button on the mixer, then press
B4
. This group gives you access to all the cue points and
looping functions. To select which of the Virtual Decks a given effect is applied to, press the mixer’s
DECK
button. The LED next to
the button indicates which of the Virtual Decks the software function applies.
(Group B5) recording
To access this group, press the
GROUP
button on the mixer, then press
B5
. In this group you can select your input source, start and
stop recording, and load this new recording to either Virtual Deck.
Previous loop.
Jump to Cue points.
Loop on / off
(toggle).
Next loop.
Control looping
from the footswitch.
Turn to adjust, and push to set loop in point.
Turn to adjust, and push to set loop out point.
Hold the joystick
up or down and
press a B button to
set a cue point.
Scroll through your crates and library.
Push to load track on right deck.
Push to load track on left deck.
Stop and erase the
last recording.
Start recording from
the footswitch.
Start recording.
Load to
left deck.
Load to
left deck.
Load to
right deck.
Load to
right deck.
Select recording
source by scrolling
up or down.
