Rane TTM 57SL, Руководство пользователя

Страница: 10 / 44

Manual-
Serato and Effects Control Panel
These “soft” controls have multiple functions for controlling
Serato Scratch
LIVE
software. These also control the Internal
Digital Effects when the mixer is operated stand-alone without a
computer. Scratch
LIVE
controls are described on page Manual-
30.
Internal Digital Effects
There are two Effects Processors available in the TTM 57SL.
Digital Effects hang out in the mixer instead of the software so
they are available for processing digital and analog signals even
when Scratch
LIVE
is not running.
• The effect for Processor 1 is the Echo.
• The effect for Processor 2 is the LFO Filter.
When Scratch
LIVE
is running, the deployed Effect is
indicated for each Effect Processor along with all of the control
assignments and settings. The Effects are still available when the
mixer is operating stand-alone, however, there is no display for
indicating the deployed Effect, control assignment or settings.
For this reason, you may want to begin by using the Effects
with Scratch
LIVE
to learn control assignments. Typically, Effects
are controlled by ear. If you know which Effect is installed in
the Effects Processors and what controls are assigned to what
functions, the Effects are very usable without the software. The
function of the controls has been standardized for stand-alone
operation to help keep stand-alone operation simple.
Inserting an Effect
There are four possible insert points for a deployed Effect:
PGM 1
,
PGM 2
,
AUX BUS
or
Main Mix
. An insert point can
only be used by one Effects Processor at a time. For example,
if
Effects Processor 1
is inserted in PGM 1, and you insert
Effects Processor 2
in PGM 1, Processor 1 is replaced by
Processor 2. When an Effects Processor is inserted in PGM 1 or
PGM 2, pre- or post-fader operation is determined by the Effect.
For example, the Echo Effect is post-fader.
The controls required to select an Effects Processor and
determine it’s insert point are shown here:
The
DECK
button selects the Effects Processor to be con-
trolled. Pressing the button toggles between Effects Processor 1
and Effects Processor 2.
B1
inserts the selected Effects Processor in PGM 1.
B2
inserts the selected Effects Processor in PGM 2.
B3
inserts the selected Effects Processor in AUX BUS.
B4
inserts the selected Effects Processor in Main Mix.
Scratch
LIVE
software effect controls mirror the TTM SL front panel.
GROUP DECK
P1 P2
J1
B1 B2
1 2
B3 B4 B5 B6
J2
DECK
B1 B2
1 2
B3 B4
ECHO
PROCESSOR 1
LFO FILTER
PROCESSOR 2
PGM 1 PGM 2 AUX B MAIN
INSERT