Rane TTM 57SL, Руководство пользователя

Страница: 2 / 44

Introduction
Please read through these operating instructions so you will
know how to get the most from your TTM 57SL and the in-
cluded Scratch
LIVE
software. Keep this manual in a safe place.
If you ever lose it, a new copy may be downloaded at
www.rane.com/ttm57sl.html .
To keep up with the latest tips, and to check for software up-
dates for your TTM 57SL, visit the Official Scratch
LIVE
Forum
at scratchlive.net.
Minimum system requirements
• At least one turntable or CD player.
• Computer with USB 1 port supporting Full Speed Mode (USB 1.1).
• Screen resolution 1024 x 768 or higher.
• Hard drive space for storing music.
• PC Windows XP with Service Pack 1
Pentium 3 / 700 Mhz
256 MB RAM.
• Mac OSX 10.3
G4 / 500 Mhz
256 MB RAM.
Scratch
LIVE
is compatible with Intel-based Mac computers.
Note: no sound card is necessary.
Check List
These items are included with the TTM 57SL in the box:
• Scratch
LIVE
software install disc.
• 2 (two) control CDs.
• 2 (two) control records.
• 1 USB cable.
• IEC C5 line cord.
• Package of 4 rubber feet.
• Quick Start Guide.
• This manual.
Copyright notices
© 2006 Rane Corporation. All rights reserved. Scratch
LIVE
and the Scratch
LIVE
logo are trademarks of Serato Audio Re-
search. Trademarked in the U.S. and other countries. Licensed
exclusively to Rane Corporation. This software is based in part
on the work of the Independent JPEG Group, and uses libpng
code, copyright © 2000-2002 Glenn Randers-Pehrson. Win-
dows XP is either a registered trademark or a trademark of Mi-
crosoft Corporation in the United States and/or other countries.
Apple, Mac, Macintosh and iTunes are trademarks of Apple
Computer, Inc., registered in the US and/or other countries.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance
with manufacturer’s instructions. If rackmounting, provide
adequate ventilation. Equipment may be located above or
below this unit, but some equipment (like large power ampli-
fiers) may cause an unacceptable amount of hum or may
generate too much heat and degrade the performance of this
equipment.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus that produce heat.
9. Do not defeat the safety purpose of the grounding-type plug.
A grounding-type plug has two blades and a third grounding
prong. The third prong is provided for your safety. If the pro-
vided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord and plug from being walked on or
pinched particularly at plugs, convenience receptacles, and the
point where it exits from the apparatus.
11. Only use attachments and accessories specified by Rane.
12. Use only with the cart, stand, tripod, bracket, or table speci-
fied by the manufacturer, or sold with the apparatus. When
a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over. This equipment may
be installed in an industry standard equipment rack. Use screws
through all mounting holes to provide the best support.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the appara-
tus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. The plug on the power cord is the AC mains disconnect
device and must remain readily operable.
WARNING
: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture. Apparatus shall not
be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
To reduce the risk of electrical shock, do not open the unit.
No user serviceable parts inside. Refer servicing to qualified
service personnel.
The symbols shown below are internationally accepted symbols that
warn of potential hazards with electrical products.
This symbol indicates that a dangerous voltage
constituting a risk of electric shock is present
within this unit.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
WARNING