Manual-
The Software:
Getting started
1) Install the software
Mac
1. Insert the Software Installation CD-ROM and double-click
the installer icon.
Windows XP
1. Insert the Software Installation CD-ROM. If Setup doesn’t
start automatically, browse to the CD drive and run
setup.exe
.
Note
: Select
custom install
to change the directory
you wish to install Scratch
LIVE
into.
2. Follow the on-screen instructions. Once the installation is
complete, Scratch Live appears in the Start Menu under
All
Programs > Serato > Scratch Live
.
2) Connect the TTM 57SL mixer
Mac
Mac users need only connect the mixer after installing the soft-
ware. No extra hardware installation is required.
Windows XP
There are two drivers to install. The first is the standard Win-
dows driver that allows you to use your TTM 57SL as a sound
card. The second driver allows you to use the TTM 57SL with
Scratch
LIVE
.
When the TTM 57SL is connected to the computer with
the USB cable for the first time, Windows will recognize it with
'Found New Hardware' bubbles appearing in the taskbar. Wait
for it to finish as it loads the default sound card driver. When
you see the bubble "Your new hardware is installed and ready to
use," proceed to install the Scratch
LIVE
driver.
Installing the Scratch
LIVE
driver.
4. With the Scratch
LIVE
installation CD in the drive, run
Scratch
LIVE
.
5. Windows will ask you if you wish to search for drivers on the
internet – select “
No, not this time
”, and click “
Next
”
6. Choose the “
Install the software automatically
” option, and
click “
Next
”
7. Windows may warn you that the driver has not been signed.
Click “
Continue Anyway
”
8. Click
Finish.
TTM 57SL as a sound card
The TTM 57SL will be available as a standard Windows sound
card whenever Scratch
LIVE
is not running. It will replace the
previous sound card and default to
TTM57SL Line 2
(select
D 2
on
either of the
PGM INPUTS
).
If you wish to change to
Line 1
or back to your previous
sound card when not using the TTM 57SL:
1.
Start > Control Panel > Sounds and Audio Devices.
2. Click the
Audio
tab.
3. Make changes using the drop menus for both
Sound Playback
and
Sound Recording
.
4. Click
OK
.
Tip
: Be aware that Windows system event sounds (beeps, dings,
etc.) will come through your TTM 57SL when it is your sound
card. To prevent embarrassment, have no other applications run-
ning. Better yet, turn off your computer’s sound scheme:
1.
Start > Control Panel > Sounds and Audio Devices.
2. Click the
Sounds
tab.
3. Under
Sound scheme
, change to
No Sounds
.
4. Click
OK
.
