R&S SMW-K553, Руководство пользователя

Страница: 6 / 44

Welcome to the Frontend Control option
R&S
®
SMW-K553
6 User Manual 1179.4240.02 ─ 02
To output the upconverted IF signal from the R&S SMW at the external frontend, select
"RF A/RF B > On".
1.3 What's new
This manual describes firmware version FW 5.00.044.xx and later of the
R&S
® SMW200A.
Compared to the previous version, it provides the new features listed below:
●
Controlling external frontends description added to operating, see Chapter 3.2,
"Controlling external frontends" , on page 14.
●
Network configuration of the external frontend, see Chapter 4.2.5, "Network set-
tings" , on page 28.
●
Network connection errors description added to troubleshooting, see "Network con-
nection errors" on page 31.
1.4 Documentation overview
This section provides an overview of the R&S SMW user documentation. Unless speci-
fied otherwise, you find the documents on the R&S SMW product page at:
www.rohde-schwarz.com/manual/smw200a
1.4.1 Getting started manual
Introduces the R&S SMW and describes how to set up and start working with the prod-
uct. Includes basic operations, typical measurement examples, and general informa-
tion, e.g. safety instructions, etc. A printed version is delivered with the instrument.
1.4.2 User manuals and help
Separate manuals for the base unit and the software options are provided for down-
load:
●
Base unit manual
Contains the description of all instrument modes and functions. It also provides an
introduction to remote control, a complete description of the remote control com-
mands with programming examples, and information on maintenance, instrument
interfaces and error messages. Includes the contents of the getting started manual.
●
Software option manual
Contains the description of the specific functions of an option. Basic information on
operating the R&S
SMW is not included.
Documentation overview