R&S SMW-K553, Руководство пользователя

Страница: 28 / 44

External frontend configuration and settings
R&S
®
SMW-K553
28 User Manual 1179.4240.02 ─ 02
4.2.5 Network settings
Access:
1. Select "RF A/RF B" > "RF Frontend" > "Frontend Device".
2. Select "Network".
The tab provides settings necessary to configure network settings of the external
frontend.
How to: "Network connection errors" on page 31
Settings:
Address Mode ............................................................................................................... 28
IP Address .....................................................................................................................28
Subnet Mask ................................................................................................................. 29
Apply ............................................................................................................................. 29
Address Mode
Selects the mode for assigning the IP address of the external frontend.
Remote command:
n.a.
IP Address
Displays the IP address of the external frontend in the network.
To assign an IP address manually, select "Address Mode" > "Static".
By default, the external frontend is configured to use dynamic TCP/IP configuration
and to obtain the whole address information automatically.
If the network does not support DHCP or the attempt does not succeed, the external
frontend tries to obtain the IP address via Zeroconf (APIPA) protocol. IP addresses
assigned via Zeroconf start with the number blocks 169.254.*.*.
Note: An IP address that is assigned via the Zeroconf protocol although the network
requires an IP address assigned via the DHCP server can cause network connection
failures.
Remote command:
[:SOURce<hw>]:EFRontend:IPADdress?
on page 40
RF frontend settings