R&S SMW-K553, Руководство пользователя

Страница: 19 / 44

Operating external frontends
R&S
®
SMW-K553
19 User Manual 1179.4240.02 ─ 02
3.3 Generating external frontend RF signals
To configure and output the external frontend RF signal
The procedure assumes, that a remote control connection between R&S SMW and
R&S FE44S is established, see "To configure the R&S SMW for frontend control"
on page 14.
1. Configure the output RF signal.
Once you connect the external frontend, the R&S SMW sets the "RF Frequency" in
the taskbar automatically. In particular, the R&S SMW sets the lower frequency of
"Frequency Band 1", i.e. 24 GHz.
2. In the status bar of the R&S SMW, adjust the frequency and level of the RF signal,
that is output at the external frontend.
3. In the block diagram, select "RF > On".
Generating external frontend RF signals