Remote-Control Commands
R&S
®
SMCVB-K164
91
User Manual 1179.0974.02 ─ 02
[:SOURce<hw>]:BB:T2DVb:PIDTestpack
............................................................................91
[:SOURce<hw>]:BB:T2DVb:PRBS[:SEQuence]
...................................................................91
[:SOURce<hw>]:BB:T2DVb:TSPacket
................................................................................92
[:SOURce<hw>]:BB:T2DVb:PLP<ch>:INPut:TESTsignal
<TestSignal>
Defines the test signal data.
Parameters:
<TestSignal>
TTSP
*RST:
TTSP
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:PAYLoad
<Payload>
Defines the payload area content of the
packet.
Parameters:
<Payload>
PRBS | H00 | HFF
*RST:
PRBS
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:PID
<Pid>
.
Parameters:
<Pid>
integer
Range:
0 to 8191
*RST:
8191
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:PIDTestpack
<PidTSPacket>
If a header is present in the test packet ("Test TS Packet > Head/184 Payload"), you
can specify a fixed or variable packet identifier (PID).
Parameters:
<PidTSPacket>
NULL | VARiable
*RST:
NULL
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:PRBS[:SEQuence]
<Prbs>
Sets the length of the PRBS sequence.
You can select a PRBS 15 or a PRBS 23 sequence as specified by
Input Commands