Remote-Control Commands
R&S
®
SMCVB-K164
84
User Manual 1179.0974.02 ─ 02
Example:
See
Example "Querying general T2-MI interface parameters"
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:INPut:T2MI:RESetlog
Resets the log file.
Example:
See
Example "Querying general T2-MI interface parameters"
Usage:
Event
Manual operation:
See
[:SOURce<hw>]:BB:T2DVb:INPut:T2MI:SID
<Sid>
.
Use the SID, when transmitting a composite signal, in accordance with annex
I of the
specification
Parameters:
<Sid>
integer
Range:
#H0 to #H7
*RST:
#H0
Example:
See
Example "Querying general T2-MI interface parameters"
[:SOURce<hw>]:BB:T2DVb:INPut:TSCHannel
<Dvbt2TsChannel>
Selects the IP-based transport stream (TS) channel. You can select 1 out of 4 IP TS
channels as input at the "IP Data" interface.
To configure a particular channel, see
Chapter 4.2.5, "IP Channnel x Settings"
Parameters:
<Dvbt2TsChannel>
1 | 2 | 3 | 4
*RST:
1
Example:
See
Example "Configuring general input signal properties"
Manual operation:
See
Input Commands